#### 21 / Mar / 2017

Mednaffe NST (unofficial) Version 0.9.3 released (for Windows) with the following changes:

-     NES  5-8. (   Mednafen  doomday;       )
==============================================
- Added input settings for NES ports 5-8. (for unofficial version of Mednafen by doomday; by default is hidden if the original version used)

#### 17 / Mar / 2017

Mednaffe NST (unofficial) Version 0.9.2 released (for Windows) with the following changes:

-    Mednafen 0.9.43
-     : 3-8  PC-FX, PSX  3-12  Saturn.
-      Sega Saturn.
-  Saturn        32-  Mednafen  Saturn.
-        PC-FX,    :) 
- c   Mednafen. (    0.8.5)
- c  .
==============================================
- Added settings for Mednafen 0.9.43
- Added missing ports input settings: 3-8 for PC-FX, PSX and 3-12 for Saturn.
- Added paths setting for Sega Saturn carts.
- Saturn settings now by default is not active if using 32-bit build of Mednafen without Saturn.
- Removed nonexistent rapid buttons in the PC-FX controller setup, added by mistake :)
- Fixed Mednafen version check. (taken from the original version 0.8.5)
- Corrected spelling mistakes.

#### 1 / Feb / 2017

Mednaffe NST (unofficial) Version 0.9.1 released (for Windows) with the following changes:

-    Mednafen 0.9.41
-     2/6   SMD.
==============================================
- Added settings for Mednafen 0.9.41
- Added buttons for setting 2/6-buttons controllers SMD.

#### 07 / Jan / 2017

Mednaffe NST (unofficial) Version 0.9 released (for Windows) with the following changes:

-     SMD.  (   Mednafen  doomday;       )
-    PCE Fast  SNES Faust.
===============================================
- Added setting for SMD overcloking.  (for unofficial version of Mednafen by doomday; by default is hidden if the original version used)
- Added settings for PCE Fast and SNES Faust.

#### 21 / Dec / 2016

Mednaffe NST (unofficial) Version 0.8.8 released (for Windows) with the following changes:

-   -   . 
-     NES. (   Mednafen  doomday;       )
-     PC Engine GE CD BIOS.
-   .
-   .
=====================================
- Added Rapid Buttons to Controller Setup.
- Added setting for NES overcloking. (for unofficial version of Mednafen by doomday; by default is hidden if the original version used)
- Fixed PC Engine GE CD BIOS path.
- Minor cosmetic changes.

#### 12 / Oct / 2016

Mednaffe NST (unofficial) Version 0.8.4 released (for Windows) with the following changes:

-    Mednafen 0.9.39.2    .
-     "  "   / /ip.
-      "      ".
-     NES, SMD, PCE, PCFX, SS, PSX, SNES. (  )
-   "X"      .
-      "  cue/toc/ccd/m3u"  "   ROM  CD" (          ROM  CD).
-            x,xx. (     00         00    )
-     Sega Saturn ROM BIOS.
-   . (      .        'Shift'  "Shift+1"   "Shift+!"  ..)
-     NES   "     PAL "  239. (   287)
-     SMD  2  8    3  6- . (     2/3 )
-   "  "      .
-    " "     Windows.
-    : "       1  2". (   ,     )
-   ,    : 'netplay.smallfont' 'filesys.disablesavegz' 'pce.psgrevision "enhanced"' 'nes.forcemono'
-   .
-    .
====================================================================
- Added settings for Mednafen 0.9.39.2 and other missing settings.
- Added combo box for "Server hostname" with choise add/remove hostname/ip.
- Added option for netplay "Connect to remote host after the game is loaded".
- Added input settings for NES, SMD, PCE, PCFX, SS, PSX, SNES. (ports and other)
- Added "X" button to remove folder from game list.
- Changed option for game list "Show Only cue/toc/ccd/m3u" to "Show Only ROM & CD Images" (Added more file extensions to scan files for rom and cd images only).
- Fixed set spin buttons x,xx values bug when load conf settings. (if xx was > 00 it was set to 00 or default value)
- Fixed Sega Saturn ROM BIOS paths.
- Fixed Key Assignments. (By pressing some keys the program stopped responding. If has been pressed key in combination with the 'Shift' e.g. "Shift+1" then assigned "Shift+!" etc.)
- Changed max value to 239 in NES video setting "Last scanline in PAL mode". (mistakenly was 287)
- Changed SMD controller setup to 8 ports and 6-button Gamepad. (not working for 2/3-buttons Gamepad)
- Changed setting "Sound playback rate" to a combo box with static values.
- Removed unused on Windows "Sound driver" options.
- Removed some key assignments: "Configure buttons for emulated device on port 1,2". (to reduce the size of the window, and don't really need to change them)
- Removed old settings which are not supported: 'netplay.smallfont' 'filesys.disablesavegz' 'pce.psgrevision "enhanced"' 'nes.forcemono'
- Minor cosmetic changes.

#### 21 / Feb / 2016

Mednaffe 0.8.1 is released with the following changes:

- [Windows] Fix xbox 360 controller detection on some conditions.

#### 24 / Jul / 2015

Mednaffe 0.8 is released with the following changes:

- [Windows] Support for XInput devices.
- Support for key assignments to (some) mednafen functions.
- Added deadzones for analog axis (Thanks to tapcio for report it).
- New tab with text widgets in order to read logs.
- Added the ability to select an mednafen executable if it is not found in path.
- [Windows] 'video.disable_composition' option added.
- [Windows] Missing sound driver options added.
- [Linux] Rewrite the error handling process.
- [Linux] Fix (mostly) deprecated functions.
- Better alingment between widgets.
- Minor cosmetic changes.

#### 02 / May / 2015

Mednaffe 0.7 is released with the following changes:

- Controller setup for systems (keyboard and gamepads)
- Static build for Windows (standalone executable to avoid GTK+ runtime dependency)
- Descriptive error messages on Windows.
- Added new settings until 0.9.36
- Mednafen version is detected properly now on Linux.
- Fixed freezing while executing emulator under some conditions on Linux.
- Fix to handle spaces in paths on Windows.
- Spins disregarding values fixed.
- More minor fixes.

Note: This version will need 0.9.36 (or above) of mednafen emulator.

#### 10 / December / 2013

Mednaffe 0.6 is released with the following changes:

- A message error is showed when mednafen gives an error.
- Descriptive error messages via '-remote' option (Only on Linux).
- Gui options have been moved to Edit->Preferences menu.
- Now you can choose which systems are showed. (Thanks to Shinra for the suggestion)
- Now Mednaffe can resize down to 768x516. (Thanks to StarrySky for report it)
- Added an option to remember window size.
- Add support to filter ccd files from CloneCd images.
- Add a desktop file and icons to install on Linux.
- Some minor fixes.

#### 16 / September / 2013

Mednaffe 0.5 is released with the following changes:

- Support for 0.9.31/32-WIP added.
- Added an option to search files recursively. (Thanks to Shoegazer for the suggestion)
- Improve performance when filling list (x20 speed up).
- List options (filters, sort direction) are saved now.
- Fix 'Open' buttons signals on Windows.
- Now Mednaffe restore after minimize on Windows.
- Fix Windows icon (hopefully)

#### 30 / August / 2013

Mednaffe 0.4 is released with the following changes:

- Mednaffe has been rewritten from scratch in C language.

#### 24 / October / 2010

Mednaffe 0.3 is released with the following changes:

- New: Qt version for Linux.
- Rewrite 'Scanlines' component for better understanding.
- Rewrite 'Resolution' and 'Scale' components for better
  usability.
- Now Mednaffe remember his position on the screen

#### 22 / August / 2010

Mednaffe 0.2 is released with the following changes:

- Fixed: Values by default are shown now.
- Fixed: Size of sound buffer in Linux.
- Minor cosmetics changes.

#### 12 / August / 2010

Mednaffe 0.1 is released. It's an alpha version.
